CPU
|
Audio
|
Back Panel Connectors
|
|
|
|
1. LGA1700 socket: Support for the 14th, 13th, and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors |
1. Realtek® ALC1200 CODEC |
1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support |
2. L3 cache varies with CPU |
2. High Definition Audio |
2. 1 x USB 3.2 Gen 2 Type-A port (red) |
(Please refer “CPU Support List” for more information.) |
3. 2/4/5.1/7.1-channel |
3. 4 x USB 3.2 Gen 1 ports |
Chipset
|
* You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. |
4. 4 x USB 2.0/1.1 ports |
|
4. Support for S/PDIF Out |
5. 2 x SMA antenna connectors (2T2R) |
1. Intel® Z790 Express Chipset |
LAN
|
6. 1 x HDMI 2.0 port |
Memory
|
|
7. 1 x DisplayPort |
|
1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
8. 1 x RJ-45 port |
1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules |
Wireless Communication module
|
9. 1 x optical S/PDIF Out connector |
2. 4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory |
Intel® Wi-Fi 6E AX211
|
10. 2 x audio jacks |
3. Dual channel memory architecture |
1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
I/O Controller
|
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
2. BLUETOOTH 5.3 |
|
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
3. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
1. iTE® I/O Controller Chip |
6. Support for Extreme Memory Profile (XMP) memory modules |
* Actual data rate may vary depending on environment and equipment. |
H/W Monitoring
|
(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to “Memory Support List” for more information.) |
Expansion Slots
|
|
Onboard Graphics
|
CPU:
|
1. Voltage detection |
Integrated Graphics Processor-Intel® HD Graphics support:
|
1. 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) |
2. Temperature detection |
1. 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz |
* The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
3. Fan speed detection |
* Support for HDMI 2.1 version and HDCP 2.3. |
Chipset: |
4. Water cooling flow rate detection |
** Support native HDMI 2.1 TMDS compatible ports. |
1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
5. Fan fail warning |
2. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 |
Support for AMD CrossFire™ technology |
6. Fan speed control |
* Support for DisplayPort 1.2 version and HDCP 2.3 |
Storage Interface
|
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
(Graphics specifications may vary depending on CPU support.) |
CPU:
|
BIOS
|
|
1. 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
|
Internal I/O Connectors
|
Chipset: |
1. 1 x 256 Mbit flash |
1. 1 x 24-pin ATX main power connector
|
1. 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB) |
2. Use of licensed AMI UEFI BIOS |
2. 1 x 8-pin ATX 12V power connector |
2. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB) |
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
3. 1 x 4-pin ATX 12V power connector |
3. 6 x SATA 6Gb/s connectors |
Unique Features
|
4. 1 x CPU fan header |
RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices |
|
5. 1 x water cooling CPU fan header |
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices |
1. Support for GIGABYTE Control Center (GCC) |
6. 3 x system fan headers |
|
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
7. 1 x system fan/water cooling pump header |
Bundled Software
|
2. Support for Q-Flash |
8. 2 x addressable LED strip headers |
|
3. Support for Q-Flash Plus |
9. 2 x RGB LED strip headers |
1. Norton® Internet Security (OEM version) |
4. Support for Smart Backup |
10. 3 x M.2 Socket 3 connectors |
2. LAN bandwidth management software |
|
11. 6 x SATA 6Gb/s connectors |
Operating System
|
USB
|
12. 1 x front panel header |
|
Chipset:
|
13. 1 x front panel audio header |
1. Support for Windows 11 64-bit |
1. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support |
14. 1 x USB Type-C® header, with USB 3.2 Gen 2 support |
2. Support for Windows 10 64-bit |
2. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header |
15. 1 x USB 3.2 Gen 1 header |
Form Factor
|
3. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
16. 2 x USB 2.0/1.1 headers |
|
Chipset+2 USB 2.0 Hubs: |
17. 2 x Thunderbolt™ add-in card connectors |
1. Micro ATX Form Factor; 24.4cm x 24.4cm |
1. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
18. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
2. 1 x USB 3.2 Gen 2 Type-A port (red) |
Chipset+2 USB 2.0 Hubs: |
19. 1 x serial port header |
3. 4 x USB 3.2 Gen 1 ports |
1. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
20. 1 x reset button |
4. 4 x USB 2.0/1.1 ports |
|
21. 1 x Q-Flash Plus button |
5. 2 x SMA antenna connectors (2T2R) |
|
22. 1 x Clear CMOS button |
6. 1 x HDMI 2.0 port |
|
23. 1 x reset jumper |
7. 1 x DisplayPort |
|
|
8. 1 x RJ-45 port |
|
There are no reviews yet.